5 Best Floor Jack for Jeep Wrangler to Repair Easily in 2024

Last Updated on April 20, 2023

As you drive your Jeep Wrangler, you hear a strange noise. When you pull over to check, you realize you’ve got a flat tire. It’s time to change the tire, but your jack’s broken. For these reasons, you should always have the best floor jack for Jeep Wrangler on hand.

Any Jeep owner can use it because it is durable, easy to move around, and convenient. You can perform critical repairs and maintenance on your vehicle by elevating it above the ground with floor jacks in any location. All you need to know is how to use it and its benefits.

Prior to buying a floor jack, you should know the types. Floor jacks come in different kinds, each with its pros and cons. This post will give you the top five options for your Jeep Wrangler floor jack. Let’s begin.

What Are the Differences Between A Bottle Jack And A Floor Jack?

There are a few critical differences between bottle jacks and floor jacks for Jeep Wranglers. The frame of bottle jacks is typically narrower than floor jacks, making them less stable.

When working with standard-clearance vehicles like Jeep Wranglers, bottle jacks have a minimum lift height, like a scissor jack or trail jack. For these reasons, many mechanics prefer to use a floor jack for lifting a Jeep Wrangler.

Unlike bottle jacks, floor jacks are more stable and have a greater lifting capacity. Consider factors like stability, lift height, and storage capacity when choosing the best floor jack for the wrangler.

What Weight Floor Jack Do I Need?

If you’re looking for a floor jack for a Jeep Wrangler, you’ll need to consider both the vehicle’s weight and the type of terrain you’ll be using it on. For most Wranglers, a 2-ton jack should be sufficient.

You may need a 3.5-ton jack if you regularly take your Wrangler off-road or if it’s particularly heavy. It is also essential to select a jack with a wide base and large wheels, as this will make it easier to maneuver over rough terrain.

Is a 2-Ton Floor Jack Enough for a Jeep Wrangler?

Yes, but it depends on how much you weigh and the terrain you’ll use. Think about the weight of the car you will be lifting. 2-ton jacks can lift about 4,000 pounds, which is more than the average load of a Jeep Wrangler.

You also have to think about the car’s height. A taller jack may be necessary for an SUV or truck. And, think about the type of ground you will be using the jack on. If you are working on a soft surface, such as grass or sand, you may need a wider base to keep the jack from sinking.

The following two Jeep Wrangler floor jacks should be able to meet your needs:

1. Pro-Lift F-767 Grey Low Profile Floor Jack

The Pro-Lift F-767 grey low profile floor jack is an excellent option for those looking for a reliable and safe floor jack. This jack is made of alloy steel and has a maximum lifting height of 14 inches. It also has a load capacity of 2 tons.

This jack is perfect for use with Jeeps and other low-profile vehicles. A patented bypass device prevents overpumping, and a built-in safety valve prevents overload. The heavy-duty steel construction ensures long-lasting durability.

How Can This Product Help You?

The Pro-Lift F-767 floor jack is designed for Jeeps and other vehicles with low ground clearance. This jack has a low profile design that allows it to fit under vehicles with a minimum clearance of 3-1/2 inches, making it perfect for use on vehicles like the Jeep Wrangler. 

It also features an overload valve that helps prevent damage to the jack if it is overloaded. This jack also has a quick-release valve that allows you to lower the vehicle slowly and safely. Plus, the swivel casters on this jack make it easy to maneuver around your garage or workshop.

---

2. Powerbuilt 2 Ton Triple Lift Floor Jack

With the Powerbuilt 2 ton triple lift floor jack, you can lift cars, Jeeps, trucks, motorcycles, ATVs, transmissions, and lawnmowers. This jack can handle most jobs with a lifting capacity of 4000 pounds and a maximum lifting height of 17.5 inches.

When raised, the safety bar locks the jack into place, eliminating the need for a jack stand because of the wide wheelbase. With the Triple Lift design, you can lift items up to a wide range of heights, so it is ideal for any Jeep Wrangler model.

How Can This Product Help You?

This jack is designed for easy maneuverability, so you can get it into position quickly and easily. It’s also compact enough to store easily when not in use. But most importantly, the Powerbuilt 620422E floor jack is sturdy and reliable.

It can easily handle heavy loads so you can use it for various tasks. Whether you need to raise your Jeep for a tire change or transmission work, or you just want a safe way to lift it for storage, the Powerbuilt 620422E floor jack is up to the task.

---

These two options for the best floor jack for a lifted Jeep Wrangler should give you a good idea of what to look for when shopping for a floor jack. Be sure to consider your needs and choose the option that is right for you.

What Size Hydraulic Jack for Jeep Wrangler?

A hydraulic floor jack is a powerful and versatile tool that can be used for various tasks, from lifting heavy machinery to changing a tire. If you’re looking for a hydraulic floor jack for your Jeep Wrangler, there are a few things you need to keep in mind.

• Take a look at your Jeep’s weight first. A heavier Jeep will require a more powerful jack, so choose one that can handle the weight.
• Next, consider the purpose of the jack. If you’re only going to be using it for occasional tasks, a smaller model will suffice. A larger model will be needed when you plan to use it more often.
• Remember to consider your Jeep’s height as well. A taller Jeep will require a taller jack, so choose one tall enough to reach the raised vehicle.

There are two powerful and best jacks performing hydraulic floor jacks for Jeep Wranglers in the market they are:

➤ Torin 2.5 Ton Hydraulic Floor Jack

Customers looking for a reliable and durable hydraulic floor jack should consider the Torin 2.5 ton hydraulic floor jack. Because it is made of alloy steel, it can handle a lot of weight and is built to last. With a minimum lifting height of 3-3/8″, it is ideal for most cars, Jeeps, trucks, and SUVs.

It also has a protection bypass system that prevents overloading. Two larger steel casters and two 360-degree swivel casters make maneuvering this jack a breeze. Plus, the built-in carrying handle allows for quick and easy transport.

How Can This Product Help You?

This floor jack is designed specifically for low-profile vehicles, which makes it the perfect tool for lifting a Jeep Wrangler. With its 2.5-ton capacity, the Torin TORT825051 floor jack can easily lift your Jeep off the ground, making it a great choice for changing a tire or performing other repairs.

And when you’re done working, the jack’s quick-release valve lets you easily lower your Jeep back down to the ground. The TORT825051 also comes with a built-in safety valve that prevents overloading, making it a safe and reliable choice for all your lifting needs.

---

➤ Blackhawk B6350 black/red fast lift service jack

The Blackhawk B6350 black/red fast lift service jack makes it easy to lift and support your Jeep Wrangler. Whether you are changing a flat tire or working on your engine, this jack can lift 3.5 tons or 7,000 pounds.

It also features a swivel saddle that easily positions the jack and provides user protection, as well as a rugged universal joint for precise load control.

The compact jack design makes it easy to store away after use. The jack can even be used in a variety of situations due to its lifting range of 5.5 inches to 22 inches, like a high lift jack.

How Can This Product Help You?

This floor jack is an indispensable tool for professionals and amateurs alike. Its fast lifting capabilities, sturdy construction, and large size make it the obvious choice for anyone who wants a reliable and efficient jack.

It’s ideal for garages and workshops. The large size of the jack makes it suitable for lifting heavy vehicles. Plus, the bypass device protects against overloading. The rear swivel caster wheels make it easy to maneuver.

---

With these two floor jacks, you can quickly and safely lift your Jeep Wrangler. Choose the one that best suits your needs and budget.

What Is the Best Floor Jack for the Money?

When finding a floor jack value for the money, you need to consider your specific needs. If you are lifting heavy vehicles, you will want a jack to handle the weight. If you are working in a tight space, then you will want a compact jack that is easy to maneuver.

These kinds of floor jacks are made from durable materials, and they can easily support up to 4 000 to 7000 pounds. The tool has a safety valve that keeps it from overloading and a quick-release feature that lets you lower your vehicle quickly and safely. You can see this one:

➤ Arcan 3-ton quick rise aluminum floor jack

For Jeep Wrangler owners looking for a reliable and sturdy floor jack, the Arcan 3-ton quick rise aluminum floor jack is a great choice. Made of lightweight aircraft-grade material, it has a lifting capacity of 6,000 pounds and is easy to maneuver.

The dual pump pistons quickly raise the floor jack saddle to load, and the reinforced lifting arm ensures maximum strength and torsion control.

A side-mounted handle enables easy jack positioning, and the lifting range is 3.75″ to 18″. Your Jeep Wrangler is safe since it meets ASME PASE-2019 requirements.

How Can This Product Help You?

This Arcan ALJ3T floor jack is perfect for the home mechanic looking for a reliable, durable floor jack. Designed from heavy-duty material, this 3-ton floor jack features a hydraulic release for safe and easy lowering of your Jeep.

The low-profile design allows it to fit under most cars, including low-profile sports cars. Aside from its large lifting range, the Arcan jack can be used for vehicles with different ground clearance heights. If you’re looking for a good-value floor jack, you’ll love this Arcan ALJ3T.

---

This floor jack can handle the weight of your Wrangler and is easy to maneuver. With a quick-rise dual pump, it can be used for a variety of vehicles. It’s perfect for the home mechanic or anyone seeking a durable floor jack.

Comparison Table of Floor Jack for Lifted Jeep Wrangler

Product	Material	Maximum Lifting Height	Load Capacity	Weight
Pro-Lift F-767	Alloy Steel	14 Inches	2 tons	30 Pounds
Powerbuilt 620422E	Metallic Fiber	‎17.5 Inches	‎2 tons	79.2 Pounds
Torin TORT825051	Alloy Steel	15 Inches	2.5 tons	27.15 Pounds
Blackhawk B6350	‎Alloy Steel	‎22 Inches	‎3.5 tons	‎85 Pounds
Arcan ‎ALJ3T	Aluminum	‎18 Inches	3 tons	56 Pounds

How to Choose the Best Floor Jack for Jeep Wrangler?

Now that you know the different types of floor jacks and their features, it’s time to choose the best jack for your Jeep Wrangler. You must consider your needs and budget to find the perfect floor jack. Here are some factors to keep in mind when choosing a floor jack for your Jeep:

Weight of Your Jeep

The Jeep’s weight is crucial because it will determine the capacity of the jack and how much weight it can safely lift. In most cases, you can find out the Jeep’s weight by consulting the owner’s manual.

This will list the gross vehicle weight, which is the vehicle’s total weight, including passengers and any aftermarket accessories. Once you have determined the gross vehicle weight of your Jeep, you can then choose a floor jack with a capacity that exceeds this number.

Construction Material of Jack

The floor jack you choose must be made from durable materials that can support the weight of your Jeep Wrangler. In most cases, aluminum is the most suitable choice because it is lightweight and corrosion-resistant.

Some floor jacks are also made from steel, which is more durable. The downside to steel is that it is also extremely heavy, so moving it can be difficult. If you choose a steel floor jack, make sure it has wheels that make it easy to transport.

Size of Floor Jack

The floor jack should be big enough to reach the ground and support the weight of the Wrangler. If you have a two-door Wrangler, you need a floor jack at least 14 inches tall. To lift a four-door Wrangler, you will need a floor jack that is at least 18 inches high.

Once you have determined the right height, you also need to consider the width of the floor jack. If you have a narrow garage, or you plan to take the floor jack on the road with you, choose a model that is not too wide.

To determine the floor jack’s size, measure the distance from the bottom of the jack to the top of the saddle. The saddle is the part of the jack that comes in contact with your Jeep.

Lifting Range

The lift range is the distance between the lowest and highest point that the floor jack can reach. In most cases, you want a floor jack with a lifting range of at least 3 to 18 inches.

This will give you enough clearance to work on your Jeep without worrying about the floor jack hitting anything. Plus, it will allow you to jack up your Jeep high enough to change a tire. You can find the information on the lifting range in the product description.

Lifting Capacity

Most floor jacks have a capacity of 1.5 to 2 tons, but some can lift up to 3.5 tons. If you plan on doing any severe wheeling, you will want to choose a floor jack with a higher lifting capacity.

A lower capacity will suffice if you only plan on using the floor jack for maintenance purposes. And if you have a lightweight Jeep, such as a Wrangler Sport, you can get away with a lower-capacity floor jack.

Check the owner’s manual to see what the maximum lifting capacity of your Jeep is. You don’t want to choose a floor jack that can lift more weight than your Jeep.

Safety Features

When lifting your Jeep, safety is always the top priority. Look for a floor jack that has security features, such as a pressure-relief valve and a built-in bypass device.

The pressure-relief valve prevents the floor jack from overloading, while the bypass device protects against over-pumping. Both of these features will help to prevent accidents and injury.

Ease of Use

The floor jack should be easy to operate, so you can quickly and safely get your Jeep off the ground. Look for a model with an easy-to-reach handle that is comfortable to grip. You also want a floor jack that is easy to position under your Jeep.

Some floor jacks have wheels that make them easy to roll into place. Others have a swivel saddle that allows you to position the jack without moving the entire unit. These features will make it easier to use the floor jack, and they can be helpful in tight spaces.

How to Use a Floor Jack on a Jeep Wrangler?

Many Jeep Wrangler owners want to know about floor jacks for their vehicles. Here are some instructions on how to do this:

1. Park your Jeep Wrangler on a level surface and set the parking brake. Place the floor jack under the vehicle’s frame, ensuring it is centered.

2. Slowly raise the floor jack until it is high enough to lift the vehicle. Once the vehicle is lifted, place the jack stands under the frame to support it.

3. Use the floor jack to raise or lower the vehicle as needed. When you are finished, remove the jack stands and lower the vehicle back down to the ground.

Following these steps will ensure that you safely and correctly use a floor jack on your Jeep Wrangler.

Do Floor Jacks Need Hydraulic Fluid?

The answer is yes, they do. Floor jacks use a hydraulic system to function, requiring oil to work properly. When you first get your floor jack, it won’t have any oil in it, so you’ll need to add some.

It’s important to use the right type of hydraulic fluid. Most jacks will specify a particular type in the owner’s manual. If you’re not sure, ask a salesperson at your local hardware store or check online.

How to Add Jack Oil to a Floor Jack?

Start by finding the oil fill plug. This is usually a small rubber plug that can be removed by hand. Once the plug is removed, carefully pour in the desired amount of oil. Overfilling the jack can cause the jack to leak.

Once the oil has been added, replace the fill plug and extend the jack to its full height. By doing so, you will be able to expel any air bubbles that may be present. To distribute the oil evenly, turn the jack handle a few times. Then you’re done. You’ve successfully added oil to your jack.

Can You Jack Up a Jeep by the Differential with a Floor Jack?

Yes, but using two stands, one on each side of the car, is better than jacking up the rear differential. This will provide more stability and prevent the Jeep from slipping off the floor jack. Always use jack stands when working on a car to be safe.

When jacking up the car, make sure that it is level and not tilted, as this could cause the car to slide off the jack stands. Always use caution when working on a Jeep, as many people have been killed or injured by being crushed beneath a car.

It is better to take your time and do the job safely than to rush and put yourself at risk.

Can I Use a Floor Jack on Gravel for Jeep Wrangler?

No, you cannot lift your Jeep Wrangler on gravel with a floor jack. Because the floor jack was not designed to be used on gravel or uneven surfaces, it cannot be used on these surfaces.

If you lift your car on gravel using a floor jack, it can become unstable and fall off, causing serious injury or damage to your car. If you need to lift your Jeep Wrangler, do so on a flat, level surface such as concrete or asphalt. You’ll be able to work on your car while it’s stable.

Which Is Better Bottle Jack or Floor Jack for Jeep Wrangler?

Each type of jack has its pros and cons. In spite of their compact size and ease of storage, bottle jacks are more difficult to use because they have to be positioned precisely under the vehicle.

Although floor jacks are bigger and heavier, they are also easier to use since you don’t have to worry about positioning them exactly right. Check our five suggestions for the best floor jack for Jeep Wrangler reviews, which we discussed above, and also have many other advantages.

So, which is better? It honestly depends on your needs and preferences. When it comes to compact and easy storage, a bottle jack is probably a good option. Nevertheless, if you want something that’s easier to use and has more features, a floor jack is your best bet.