Last Updated on April 20, 2023
If you’re the proud owner of a lifted truck, you know that the height or ground clearance is higher than the average vehicle. Whenever you need to change a tire or perform other types of maintenance, you will need a bottle jack.
This is because the bottle jack is taller and has a longer reach than the floor jack. Consequently, you can place it under the lifted truck and raise it safely.
You need to choose the best bottle jack for lifted truck because safety is greatly related to the quality of your tools. A good quality bottle jack offers you smooth and easy operation, while a poor quality bottle jack may be wobbly and unable to support the lifted truck’s weight.
To identify reliable and well-made bottle jacks, checking out different product reviews can be a useful starting point.
Torin Big Red Hydraulic Bottle Jack for Lifting Truck
● Material: Alloy Steel
● Load Capacity: 4 Tons
● Maximum Lifting Height: 16 Inches
● Carrying Case Included: Yes
Big Red 20-Ton Low-Profile Bottle Jack
● Material: Alloy Steel
● Load Capacity: 20 Tons
● Maximum Lifting Height: 16 Inches
● Carrying Case Included: No
Pro-Lift B-004D Grey Hydraulic Bottle Jack to Lift Truck
● Material: Alloy Steel
● Load Capacity: 4 Tons
● Maximum Lifting Height: 8 Inches
● Carrying Case Included: No
Are Bottle Jacks Safe to Use on Lifted Trucks?
Using good quality bottle jacks is absolutely safe for lifted trucks. But you need to know how to use a bottle jack correctly and safely before attempting to lift your truck with one. Here are a few things to remember.
Always place the jack on level ground, ensure the area around the jack is clear of obstructions, and use caution when getting underneath the vehicle. Be sure to slowly lower the truck back down once you have finished lifting it.
Sudden jolts can cause the jack to collapse. With these safety tips in mind, you can confidently use a bottle jack to raise your lifted truck.
What Types of Bottle Jacks Are There?
There are two types of bottle jacks. One is manual hydraulic, while the other is pneumatic. The manual hydraulic model consists of a circular base, a hydraulic cylinder, and a hand pump.
Under the lifted truck to be elevated, the base is placed, and the cylinder is inserted into it. The hand pump is then used to pump oil into the cylinder, raising the piston and lifting the truck.
A pneumatic model is similar to the manual hydraulic model, but instead of a hand pump, it uses air pressure to raise the piston. Some models have manual and pneumatic lifting capabilities together.
When Do You Use a Manual Hydraulic Or Pneumatic Bottle Jack?
It will depend on your preference. Please keep in mind that the pneumatic model requires an air compressor. So, if you don’t have one, the manual hydraulic model would be your only option. Conversely, the manual hydraulic model can be used in any situation.
You just need to pump the handle to raise the piston. On the pneumatic model, you do not need any physical effort. Just make sure there’s enough air pressure, and it will do the work for you. The pneumatic model will be the best choice if you work in a garage with access to an air compressor.
If you decide to use a pneumatic bottle jack, you will need to carry a portable air compressor with you wherever you go. To obtain the best of both worlds, you can opt for a model that has both hydraulic and pneumatic lifting capabilities.
Best Manual Hydraulic Bottle Jack for Lifted Truck
If you decide to go with the manual hydraulic bottle jack, there are a few good quality options in the market.
Below, we have listed some of the best manual bottle jacks that are currently available. Take a look at the specifications, pros, and cons of each one to determine which one would be the most appropriate for you.
➤ Torin Big Red Hydraulic Bottle Jack for Lifting Truck
The Torin big red bottle jack offers a versatile and durable solution for raising the lifting trucks. It is crafted from drop-forged alloyed steel and reinforced at stress points, ensuring its strength and durability.
This jack has a lifting range of 7-1/2″ to 14-5/16″, making it suitable for a variety of lifting applications. As well, it has a capacity of 4 tons (8,000 lbs), which is adequate for most users.
A plastic blow mold carrying case is included with the product, so when it is not in use, it can easily be stored. Using this carrying case, you can also transport the jack easily from one location to another.
Reasons That May Attract You:
This bottle jack has a wide, rugged base that contributes to its stability and strength, and it is in compliance with ASME safety standards. You can use the screw top extension for a variety of purposes because it can be adjusted.
To increase its stability, both the inner and outer structures are welded. As the pressure pump utilizes a smooth, glide-action design, lifting is extremely easy.
High-quality oil powers the hydraulic system and provides superior protection against corrosion and temperature flexibility. Accordingly, this unit can operate between 40°F to 105°F.
The saddle is serrated and heat-treated, so it provides a secure grip. You can expect good performance using the Torin Big Red hydraulic bottle jack for lifting trucks.
Positive Aspects:
- Drop-forged alloyed steel construction for durability
- Range of lifting from 7-1/2″ to 14-5/16″
- Stable and strong base
- Welded inner and outer structures prevent leaks
- 4 tons (8,000 lbs) capacity meets most needs
- Transport and storage are easy with plastic blow mold cases
Limitation:
- Long-term use may weaken the seals, causing the jack to leak
➤ Big Red 20-Ton Low-Profile Bottle Jack
Big Red’s hydraulic jack is intended for both residential and commercial use. As a heavy-duty lifting device, it is made from drop-forged alloy steel, which provides a long service life.
You can easily jack up lifted trucks, cars, or other heavy-duty vehicles with this jack since it can handle loads of 20 tons. It also has a lifting range of 6-5/8″ to 10-15/16″, allowing you to suit it to your specific needs.
Reasons That May Attract You:
It features a fully welded structure that gives it the strength to easily handle big loads. The saddle provides a wide lifting area while maintaining a secure grip with the serrated and heat-treated surface.
Through the use of an oil bypass valve and an overload valve, the hydraulic system is protected from being overloaded. Since it meets ASME PASE safety standards, you can be confident that the Big Red 20-ton low-profile bottle jack is a safe and reliable choice for your lifting requirements.
Positive Aspects:
- Forged from drop-forged alloy steel for a long service life
- It is capable of handling loads of about 20 tons
- Fully welded structure for added strength
- Meets ASME PASE safety standards
- Overload and bypass valves protect hydraulic systems
Limitation:
- There may be a tendency for oil to leak after prolonged use
➤ Pro-Lift B-004D Grey Hydraulic Bottle Jack to Lift Truck
The Pro-Lift bottle jack is constructed of alloy steel, which is durable and can withstand long-term use.
With a load capacity of 4 tons, you can easily lift your truck with it. There is a maximum lifting height of 8 inches, which is adequate for raising most lifted trucks.
Reasons That May Attract You:
You can easily and effectively lift your truck with this safe jack. The steel lifting saddle is engineered in such a way as to ensure a secure grip on the load.
You can adjust the extension screw to achieve the desired working height. There is also a built-in bypass system designed to prevent the overtravel of the ram.
Due to its heat-treated critical stress areas, you can rest assured that it will perform well. It is also designed to meet ANSI/PALD standards, so you know it is a reliable product. You may wish to consider using the Pro-Lift B-004D bottle jack to lift the truck.
Positive Aspects:
- Alloy steel construction for durability
- It has a load capacity of four tons
- Lifting height of 8 inches is adequate for most trucks
- Built-in bypass system prevents ram overtravel
- Heat-treated critical stress areas for reliable performance
- Secure grip on load with steel lifting saddle
- Height-adjustable extension screw
Limitation:
- Not suitable for the heavy-duty truck over 4 tons
➤ Powerbuilt 3 Ton All In One Bottle Jack With Jack Stand
With this product, Powerbuilt offers some great convenience because it is both a bottle jack and a jack stand in one. You can easily use it on lifted trucks, SUVs, vans, RVs, and trailers.
It is capable of lifting 3-ton and has a range of lift of 11 to 21 inches. You can use this versatile jack for multiple purposes, and it will be very helpful to have around. As this product is made from aluminum, making it lightweight and easy to transport.
Reasons That May Attract You:
The wide base ensures that the jack stand will not sink into softer surfaces, while the ratcheting safety bar allows it to stay in the raised position.
This product meets or exceeds ANSI standards, making it a safe and reliable option for anyone looking for jack stands. You can trust that the Powerbuilt 3-ton all-in-one bottle jack with a jack stand will provide stable and secure lifting, no matter what you use it for.
Whether you’re leveling an RV or trailer or just need a reliable jack stand for general maintenance, this product is up to the task.
Positive Aspects:
- Made from aluminum for light weight and portability
- Wide base prevents sinking into softer surfaces
- Ratcheting safety bar holds the jack stand in the raised position
- Meets or exceeds ANSI standards
- Provides a stable and secure lifting
Limitation:
- It may be a little bit tall for some vehicles
Best Portable Bottle Jack with Hydraulic and Pneumatic Lifting
When you need a versatile and durable bottle jack that you can rely on for both pneumatic and hydraulic lifting, the Mophorn bottle jack can be the ideal choice.
Check out its features, positive aspects, and limitations and see if it is the right model for you.
➤ Mophorn 20 Ton Heavy Duty Air Hydraulic Bottle Jack
Mophorn’s bottle jack simplifies the process of lifting heavy-duty trucks and vehicles. Because you can get two types of lifting in one with this product, it’s a time and labor saver.
One type of lifting is pneumatic, while the other is hydraulic. You can use either to your advantage, depending on the particular lifting job that needs to be done.
With a 20-ton load capacity, this heavy duty jack can handle just about anything you need it to. This device has the capability of lifting objects up to a maximum height of 6-5/8″ (17 cm).
It’s made of high-quality Q235 steel for durability and has a blue finish. The air hose that comes with it is four feet long and has a 1/4-inch by 19NPT inlet.
Reasons That May Attract You:
With its compact design and dual fast retractable springs, it is easy to use and easy to store. Its highly rugged construction provides power and security, making it the wise choice for any heavy lifting needs.
A push-button trigger design and adjustable height make it even more versatile. Whether you need a quick lift or a more secure hold, the 20-ton heavy-duty air hydraulic jack is up to the task.
Positive Aspects:
- Rugged Q235 steel construction for durability
- Hydraulic and pneumatic lifting in one
- 20-ton load capacity for a wide range of lifting needs
- Compact design for easy use and storage
- 6-5/8″ maximum lifting height
Limitation:
- There is no carrying case included
Comparison Chart of the Portable Bottle Jacks
| Product Name | Material | Load Capacity | Maximum Lifting Height | Carrying Case Included |
| Torin T90413 Big Red Bottle Jack | Alloy Steel | 4 Tons | 16 Inches | Yes |
| BIG RED T92007A Bottle Jack | Alloy Steel | 20 Tons | 16 Inches | No |
| Pro-Lift B-004D Bottle Jack | Alloy Steel | 4 Tons | 8 Inches | No |
| Powerbuilt Bottle Jack | Aluminum | 3 Tons | 21 Inches | No |
| Mophorn Air and Hydraulic Bottle Jack | Alloy Steel | 20 Tons | 17 Centimeters | No |
Factors to Consider When Choosing the Best Bottle Jack for Lifted Truck
When you have a lifted truck, you need to be extra careful when choosing a bottle jack. Not all bottle jacks on the market are created equal, and some may not be suitable for your particular vehicle.
You need to consider a few factors before making your purchase. This will help you choose a product that will be safe and effective for your needs. Follow these tips to choose the best portable jack for a lifted truck:
1. Material
The bottle jack’s material is one of the most important things to consider. You want a product that is made from high-quality materials for durability and strength.
Alloy steel is ideal for bottle jacks because it is strong yet lightweight and resistant to rust and corrosion. Due to its ability to resist high temperatures, alloy steel will not deform or break under intense pressure.
Consequently, alloy steel is the perfect material for any bottle-type jack that needs to be both durable and reliable. Another good material to look for in a jack is aluminum.
It is necessary to review the product description in order to obtain information regarding the materials used.
2. Lifting Capacity
You should also consider the lifting capacity of the jack because you need to make sure that it is suitable for your lifted truck. The lifting capacity is usually expressed in tons or pounds.
Your truck’s weight will determine the minimum lifting capacity that you require from a bottle jack. If your truck weighs 6,000 pounds, then you will need a 3-ton bottle jack.
Make sure to check the product specifications before making your purchase. This will help ensure that you choose a powerful product to lift your truck.
3. Lifting Height
Make sure to consider the maximum lifting height of the bottle jack. You need to choose a product that can lift your truck high enough to perform maintenance on it or change a tire.
A few different factors go into determining the lifting height of a jack, including the size of the ram and the length of the extension.
The best way to determine the lifting height of a particular model is to consult the manufacturer’s specifications. With this information in hand, you will be able to choose the best jack for a lifted truck.
4. Welded Inner and Outer Structure
A quality bottle jack should also have a welded internal and external structure. This feature helps to ensure that the product is durable and will not break under pressure.
It also helps to prevent leaks, which can be dangerous. The best jack for a lifted truck will have a completely welded construction for added strength and durability. Check the product description to verify that the jack has a welded structure.
5. Portability
A portable bottle jack is important as it allows you to take it with you wherever you go. If you are looking for a jack that is easy to transport, then choose a model that is lightweight and compact. These jacks are usually small enough to fit in the trunk of your car.
You should also look for a jack that comes with a carrying case. This will make it even easier to take your jack with you on the go. Check out the product description to find out if the jack comes with a carrying case.
6. Stability
It is also important to consider the stability of the bottle jack. You want to make sure that the jack is stable enough to support your lifted truck. The base of the jack should be wide enough so that it will not tip over when in use.
Some models also come with additional features that help to improve stability. These features include rubber pads or steel plates. These materials will help to grip the ground and prevent the jack from slipping.
One good and effective way to identify the stability of a jack is to read customer reviews. You can get an idea of how well the jack works in real-world conditions.
7. Saddle
When choosing a bottle jack, you should also ensure that it has a saddle. The saddle is the jack part that comes into contact with your truck. It is important to choose a jack that has anti-skid features. This will help to prevent your truck from slipping off of the jack while it is being lifted.
Read customer reviews to determine if a jack has anti-skid features. You can also check the product description to see if the saddle is made from anti-skid materials.
How Much Weight Capacity Should a Bottle Jack Have to Raise a Lifted Truck?
The weight capacity necessary for a bottle jack to raise a lifted truck will depend on the truck’s weight. You will need to consult the manufacturer’s specifications to determine the weight capacity of a particular model.
Most small to medium-sized lifted trucks can be equipped with a jack with a weight capacity of three or four tons. In the case of a larger lifted truck, you may require a jack with a higher weight capacity.
Some bottle jack models have weight capacities of approximately 20 tons. These models can be used to raise extremely heavy loads.
How High Should a Bottle Jack Be to Raise a Lifted Truck?
The answer depends on the height of the truck’s frame. A bottle jack is generally tall enough to reach the bottom of a lifted truck’s frame. Regardless of the height of the bottle jack, a lifting range of 5 to 22 inches is sufficient to raise your lifted truck.
You should consider how high you would like the truck to be off the ground. If you plan to add larger tires or wheels, you will need to raise the truck higher. Ultimately, it is important to carefully consider your needs before making a decision.
How Long Will a Bottle Jack Hold a Lifted Truck?
The answer depends on the stability of the jack. If the bottle jack is stable, it can hold up a lifted truck indefinitely. If the jack is not stable, it may only be able to hold the truck for a short period of time before collapsing.
This is why it is important to make sure that the jack is on level ground and that it is not being used to lift more weight than it was designed to handle.
Confidently Lift Your Lifted Truck With Quality Bottle Jack
It is now clear why a bottle jack is an essential tool for anyone who owns a lifted truck. We hope you will also recognize how important it is to pick the best bottle jack for lifted truck. All of the products that we have reviewed are good choices. They all have their own unique features that make them stand out.
When making your selection, be sure to carefully consider your needs. This will help you choose the product that is best suited for your lifted truck. Also, keep in mind the factors that we have discussed in the buyer’s guide. These factors will help you choose a bottle jack that is both durable and effective.
After getting the good quality bottle jack, you can use it with confidence, knowing that your lifted truck is in good hands.
