Best UTV Floor Jack: Top 5 Picks for Safe Work in 2024

Last Updated on April 15, 2023

There is a possibility that the tire on your UTV will be punctured at any time during your off-roading. You will have to stop and change the tire in such a scenario. You may have to handle other maintenance tasks on your UTV as well.

It is necessary to use a floor jack for all these tasks since this type of jack has a wide base, providing more stability on uneven terrain. The best UTV floor jack will provide you with the expected performance. Using a high-quality jack can provide you with both safety and efficiency.

You should be aware of the inferior quality products that are available in the market. That’s why checking out different UTV floor jack reviews can help choose the suitable one.

What Height Floor Jack Do You Need for Your UTV?

Your UTV’s ground clearance will determine the height of the floor jack you require. The ground clearance of a UTV typically ranges from 10 to 15 inches, though some models may have higher or lower clearance depending on their design.

This measurement refers to the distance between the bottom of the UTV’s chassis and the ground. You can find your UTV’s ground clearance in its owner’s manual. It is also possible to measure the ground clearance yourself. To do this, park your UTV on level ground and take a tape measure to gauge the height of its chassis and the ground.

Once you know your UTV’s ground clearance, select a jack that can lift your UTV over that height. For example, if your UTV has a ground clearance of 12 inches, you can choose a floor jack with a lift height of 15 inches or more. This will give you enough clearance to safely and easily lift your UTV.

Always opt for a jack with a higher lift height than you need, as this will give you more flexibility in how you use the jack.

Best Floor Jack for UTV

To lift your UTV safely and easily, you will need a floor jack that is compatible with its size and weight. It is also important to consider the quality of the jack, as you want to ensure that it is durable and reliable and that it will provide you with a long working life.

Below are some floor jacks that are suitable for UTVs, and in terms of quality, they can satisfy your needs. Take a look at each product’s specifications, good points, and limitations, and then decide which is the best fit for your UTV.

1. BILT HARD Low Profile Mini Aluminum Hydraulic Floor Jack

Using BILT HARD’s floor jack can help to make lifting and maintenance a much easier task. It has a load capacity of 1.5 tons, which allows it to lift most UTVs with ease.

Due to the 3-1/8 to 14-1/4 inch range, it is also very easy to get underneath most vehicles. The aluminum material is also designed to be lightweight and durable, so you can trust that this floor jack will last.

Reasons That May Attract You:

It is manufactured with a rust-resistant, corrosion-resistant anodized finish, which ensures its durability. This jack has a low bottom height that makes it possible to get underneath lower vehicles.

There is also a maximum lifting height that will lift the vehicle off the ground. Because of this feature, you can use the jack for vehicles that are lower as well as higher than others. 

This low-profile mini aluminum hydraulic floor jack is also equipped with a convenient side handle, making it easy to carry. When the unit is not in use, it can be easily disassembled and stored.

Your UTV will be well protected from scratches with this product due to the rubber saddle used. Due to its lightweight design, it is easy to maneuver and transport.

---

2. Powerbuilt 2 Ton Triple Lift Floor Jack

Powerbuilt’s floor jack is a heavy-duty lifting tool that is made from durable metallic fiber. It is capable of lifting up to 2 tons (4000 pounds) and can lift up to 17.5 inches. 

The triple lift design of the jack makes it versatile and able to be used on a variety of vehicles, including UTVs, ATVs, cars, trucks, motorcycles, and even transmission, lawnmowers, and snowmobiles.

Reasons That May Attract You:

This jack provides good stability and security when lifting UTVs. The jack has a wide wheelbase and includes tie-down loops to further secure the load.

Once raised, the jack is held in place by a locking safety bar, eliminating the need for a jack stand. It has a wide lift range and is durable, meeting or exceeding ASME and PALD standards.

The Powerbuilt 2-ton triple lift floor jack can be a good choice for those who need a reliable and safe way to lift their UTV.

---

3. K Tool International Heavy Duty Steel Floor Jack for UTV

The K Tool International Heavy floor jack is a quality product that is well suited for lifting your UTV. This jack is constructed from alloy steel, making it strong and durable. It also lifts from 5.5 to 18.75 inches, making it flexible enough to work with a variety of vehicles.

Reasons That May Attract You:

With its wide track front wheels and swivel rear casters, it provides stability and easy maneuverability. This compact universal jack is equipped with nylon wheels, which prevent scratches and scuffs on the floor surface, ensuring that your garage or workshop remains clean at all times.

The valve keeps the hydraulic ram and jack from over-extension and makes sure the lift doesn’t go higher than its rated capacity. So you can feel confident that your UTV is in good hands with the K Tool International heavy-duty steel floor jack.

---

4. CAT 3 Ton Big Wheel Off Road Hybrid Jack

CAT’s floor jack is constructed with a hybrid steel and aluminum construction. The load capacity of this jack is three tons, which is sufficient for most UTVs. It can raise UTVs from 6 to 21.5 inches, so you can adjust it to meet your needs.

With the adapter included with this jack, the overall maximum lift height is increased by 7.75 inches. This is a helpful feature if you need to raise your UTV higher than usual.

Reasons That May Attract You:

You can use this versatile and durable jack to quick and efficient repairs and lift various vehicles, including trucks, SUVs, UTVs, and ATVs. A dual-piston pump allows you to quickly reach the maximum height with just seven pumps.

In soft surfaces such as sand or gravel, the bottom skid plate keeps the jack stable and level. Due to the large wheels, you can easily maneuver it on any terrain, even in the desert. And because it’s made with hybrid steel/aluminum construction, it is lightweight and easy to move, store, and handle.

---

5. Eisen Tools 3 Ton Heavy Duty Floor Jack

The Eisen Tools floor jack is made of alloy steel which makes it durable enough to withstand heavy loads. This jack has a capacity of 3 tons, making it a good choice for UTVs. Its high-quality construction ensures that it will provide long-lasting, reliable service. 

Reasons That May Attract You:

You can trust the Eisen Tools 3-ton heavy-duty floor jack to give your UTV the lift it needs. A quick lift, double pump piston design enables you to raise the saddle to your vehicle easily.

The quick start technology raises the jack three times faster than a conventional hydraulic jack. An integrated hydraulic oil bypass system prevents overloading when the system is operating at 120% capacity.

This quick lift jack is in compliance with the ASME PASE-2019 safety standard. It also features a rubber cushion on the saddle and a rubber sleeve on the lower handle, which helps to prevent damage to your vehicle during use.

---

Comparison Chart of the UTV Floor Jack

Product Name	Material	Load Capacity	Maximum Lifting Height
BILT HARD Floor Jack	Aluminum	1.5 tons	13.88 Inches
Powerbuilt UTV Floor Jack	Metallic-Fiber	2 tons	17.5 Inches
K Tool International Floor Jack	Alloy Steel	3 tons	18.75 Inches
CAT UTV Floor Jack	Alloy Steel	3 tons	21.5 Inches
Eisen Tools Floor Jack	Alloy Steel	3 tons	18 Inches

Factors to Consider When Choosing the Best UTV Floor Jack

UTVs are different in size and weight from other vehicles, so it is necessary to use a floor jack that is suitable for use with them. Also, the quality of the jacks is not all the same, so you want to make sure that you get a good one.

You need to check some essential factors before deciding on the model to buy. This will help you narrow down the options and choose the best floor jack for UTV and ATV.

1. Weight Holding Capacity

The weight limit is one of the most important factors when choosing the jack. It should be able to handle the weight of your UTV without any problem. If you have a heavier UTV, then you will need a jack with a higher weight limit.

UTVs come in a wide range of sizes and styles, but one common trait they all share is weight. The average 2-seat UTV weighs between 1,200 to 1,600 pounds, while larger 4-seat UTVs can weigh up to 2,000 pounds.

Even the smaller youth UTVs weigh approximately 400 to 700 pounds. This weight can vary depending on the materials used in construction and the specific features of the UTV.

You need to know the weight of your UTV and choose a jack that can accommodate it. For added safety, you may want to purchase a jack that has a greater weight capacity than what your UTV weighs.

The information about the weight limit is generally stated in the product description. So, make sure to check it before making your purchase.

2. Lifting Range

You already know what height range floor jack you should choose for your UTV, so let’s take a closer look at how to determine the lifting range the product can provide.

The information can be found in the product description, and it is important to double-check this before you make your purchase. To determine if it has the load range you require, you can also view real customer reviews.

3. Material and Build Quality

A floor jack’s durability is determined by the material used in its construction. Since it handles a great deal of weight, it is imperative to select a jack that is made of high-quality materials. Alloy steel is a good choice as it is both strong and durable.

Metallic fiber is another material that is used in the construction of high-quality floor jacks. You can also choose aluminum-made floor jacks as they are strong and lightweight.

It is also beneficial to choose a product that has rust and corrosion-resistant anodized finish. This will help to extend the life of your floor jack. You need to check out the product description to find information about the materials used in the jack construction.

4. Overload Protection

Having an overload protection feature is greatly beneficial as it prevents the floor jack from being used beyond its weight limit. Your UTV will be protected from deterioration, and the life of the product will be extended.

To determine whether the jack has this feature, you should refer to the product specifications. Check out the actual customer reviews to see how this feature worked for them.

5. Rubberized Saddle

For lifting your UTV, the saddle is only the part that comes into contact with it. So, it is important to choose a jack that has a rubberized saddle. This means it will grip your UTV securely and won’t scratch or mark.

You can determine whether the saddle is rubberized by reviewing the product description. Upon selecting a model with a rubberized saddle, you can expect that your UTV will be handled with the utmost care.

6. Quick Lifting

The floor jack should be able to lift your UTV quickly and effortlessly. It is beneficial to choose a model with a quick-raising feature as it will save you a lot of time and effort.

In order to determine how quickly the lifting feature works, you can look at actual customer reviews. This will give you a better understanding of how the feature functions in real-world circumstances.

7. Wheels

The floor jack should have wheels that enable you to move it around easily. Choose a model with large wheels as they will be easier to maneuver and made of high-quality materials so that they can withstand the weight of the UTV. 

Nylon wheels are a good choice since they offer smooth movement. Another advantage of nylon wheels is that they do not scratch the floor. For a proper assessment of the quality of the wheels, you should review the product’s image, description, and comments from actual customers.

Where Do You Put the Floor Jack Under a UTV?

The floor jack can be safely placed at multiple points on a UTV. When changing a tire on the left side of your UTV, you can place a jack under the side frame just in the middle between the front and rear wheels. The same procedure can be followed for the right side of the UTV but on the opposite side.

To change the front tires, place the floor jack under the front axle in the middle. Before placing the floor jack under the UTV, ensure that it is level. The saddle of the jack should be in contact with a solid part of the frame rather than a suspension component.

Can I Use a UTV Floor Jack On Gravel?

The UTV floor jack can be used on gravel if it has a bottom skid plate and large wheels. Using the bottom skid plate, the floor jack will be able to grip the gravel firmly so that it does not slip.

Large wheels will make it easier to maneuver the floor jack on gravel. Without a bottom skid plate, it will be difficult to use the jack on gravel due to its tendency to slip. On sloppy gravel surfaces, it is prudent to avoid using a floor jack.

Lift and Maintain Your UTV Easily With a Reliable Floor Jack

The need for a floor jack for your UTV is now evident. Compared to other types of jacks, the floor jack is a good choice because of its wide base, long handle, and large wheels. Always keep in mind the important points that have been discussed in the buyer’s guide. This will help you decide on the best model for your needs.

All the products we have reviewed are excellent choices and will be of great value to you. All you have to do is match up the features that are most important to your UTVs.

You can evaluate products based on their specifications, benefits, and drawbacks to determine which model is most suitable for you. Hopefully, you will be able to find the best UTV floor jack and keep your UTV functional.